MFIAP.COM " G3 Accessories PAGE" / Airsoft BB Guns Air Soft Replica Firearms BB Machineguns & Weapons Accessories

Main G3 Accessories Page
This Section Covers Airsoft Accessories For:
G3A3, G3A4, SG-1, MC51 & PSG-1.


All images are protected by Copyright© Law and are NOT in the public domain. LEGAL DISCLAIMER & WARNING

Magazines Stocks Hand Guards

MC51 / G3A3-A4 / SG-1 Specific Bipods PSG-1 Specific

Tracer Flashlights Lasers

Ammo / BBs Silencers RIS / Rails

Scopes Scope Mounts Batteries

Red Dot Sites Slings Flashlight & Laser Mounts

Miscellaneous Gears General G3 Parts

G3 AIRSOFT ACCESSORIES:
NOTE: As we buy in very high volume ALL ACCESSORIES LISTED BELOW ARE IN STOCK unless otherwise stated. Items with ***PMC*** (Preferred MFI Customer) click here to see if you qualify!

All accessories listed in this section are manufactured by TOKYO MARUI unless stated otherwise. All parts listed in this section whether manufactured by MFI or by Marui will fit Marui G3s. All MFI manufactured products are specifically designed to near exact copies of their Marui counter parts but, at a fraction of the cost.

G3 MAGAZINES / MAG CLAMPS:

Click here for photos & description of all available G3 magazines.

Magazine Standard (Shorty). ( Metal ) 5 rounds (20 BBs) (Fits all above G3 variants.)
Price: ~~$35.00~~ SOLD OUT NEVER TO BE RESTOCKED AGAIN!

Magazine Standard. ( Metal ) 20 rounds (70 BBs) (Fits all above G3 variants.)
~~Price: $35.00 ***PMC Price*** Only $28.00~~ SOLD OUT NEVER TO BE RESTOCKED AGAIN!

Click here for photos & description of all available G3 magazines.

Magazine High Capacity. ( Metal ) 20 rounds (500 BBs) (Fits all above G3 variants.)
Price: ~~$48.00~~ ***PMC Price*** Only ~~$22.00~~ SOLD OUT NEVER TO BE RESTOCKED AGAIN!

Dual Magazine Connector (Marui Manufacture)(Metal) CLICK HERE FOR FULL DESCRIPTION.
HK Style Mechanism. Note that this is a FULLY ADJUSTABLE and thus fits the following weapons systems:

M16 / AR15: AEG Airsoft & Live Weapons
G3 HK, CITME, etc: AEG Airsoft & Live Weapons
FAMAS F1 & G2: AEG Airsoft & Live Weapons
AK47 & AK74: AEG Airsoft & Live Weapons
Galil: AEG Airsoft & Live Weapons
L85A1 / SA80: AEG Airsoft & Live Weapons

CLICK HERE FOR AVAILABILITY & CURRENT PRICES.

PSG-1 SPECIFIC:

PSG-1 Inner Barrel End Expansion Tube Part# P-19 (Marui Manufacture)(Plastic) (Fits Electric PSG-1 ONLY).
Price: $30.00 ***PMC Price*** Only $20.00
PSG-1 Barrel End Cap Part# P-18 (Marui Manufacture)(Metal) (Fits Electric PSG-1 ONLY).
Price: $30.00 ***PMC Price*** Only $20.00
(NOTE DOC REG.)

TOP

MC51 / G3A3, G3A4 & SG-1 SPECIFIC:

Barrel Options (Cosmetic):

Flash Suppressor PDW / NAVY Style ( Can be used on MC51 WITHOUT any modification or on G3A3, G3A4 & SG-1 if internal barrel is shortened.) Used as a replacement for your barrel & flash suppressor. Note that this is a CUSTOM part and we make them as needed. Allow 2-3 days for modification. (Black Aircraft Aluminum)
Price: $45.00 ***PMC Price*** Only $35.00 (NOTE DOC REG.)
Flash Suppressor Part# G-9 G3 (Black Metal) Price: $45.00 (NOTE DOC REG.) ***PMC Price*** Only: $30.00
Barrel (Outer)(ONLY) Part# G-8 G3A3 (AEG only), G3A4 & SG-1 (will also fit / extend MC51) (Metal) Price: 45.00 ***PMC Price*** Only: $30.00
Front Site Housing (ONLY) Part# G-8 G3 (Metal) Price: 45.00 ***PMC Price*** Only: $30.00

G3 SCOPE MOUNTS:
Because the below items can be used by other weapons / models prices are on the detailed product description page. Just click the links provided to get instant access to current pricing and availability.

MFI / HK Low Profile Scope Mount (EXTENDED VERSION): Made Specifically for LIVE WEAPONS. Manufactured from 6061 T-6 Aircraft Aluminum. Lowest profile mount available on the market.
CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.

TOP

Tokyo Marui Figure Eight Mount. Links Laser & Flashlight or connects to some barrels & then to accessory. Click here for current price.

TOP

G3 STOCKS:

Solid Stock SG-1. Marui Manufacture ( Fits Electric G3 variants ). Comes complete with Extended Length Butt Plate, Cheek Rest & Wiring Harness. Please note fuse and fuse holder are NOT installed but are included. We do this as not all G3 need these.
Price: ~~$68.00~~ ***PMC Price*** Only: ~~$58.00~~
SORRY OUT OF STOCK. NEVER TO BE RESTOCKED
Telescoping Stock G3A4. Marui Manufacture ( Fits Electric G3 variants ). Comes complete with Rear Cap and Internal Flat Spring / Lever.
Price: $85.00 ***PMC Price*** Only: $68.00
Butt Plate (Extended in length) for Solid Stock SG-1. (Black) Part# SG-10 Marui Manufacture.
Price: $25.00 ***PMC Price*** Only: $18.00
Double Stick Tape / Glue for Cheek Rest SG-1. Marui Manufacture. Price: $3.50
***PMC Price*** Only: $2.00

TOP

G3 BIPODS:

Bipod G3/SG-1 ( Metal ). Standard G3 Configuration. Fits only G3A3, G3A4 and SG-1
Price: ~~$65.00~~Only ~~$45.00~~
SORRY OUT OF STOCK. NEVER TO BE RESTOCKED

Bipod PSG-1 ( Metal with plastic like real thing ). Special Copy of Real PSG-1 Bipod. Fits only PSG-1 or European Slotted Target Hand Guard (11mm at widest point).
Price: ~~$65.00~~ Only ~~$45.00~~
SORRY OUT OF STOCK. NEVER TO BE RESTOCKED
Harris Law Enforcement / Special Operations Sniper Fully Adjustable Bipod with Swivel Base. Requires below accessory to fit in the slot cut in hand guard of PSG-1.
SORRY OUT OF STOCK. NEVER TO BE RESTOCKED
Adapter for European Size Slotted Target Hand Guard (MFI manufacture). Fits in the slot cut in hand guard of PSG-1. Allows Harris Bipod to be used.
CLICK HERE for information & pricing.

TOP

G3 HAND GUARDS / COMPLETE RAIL SYSTEMS / RIS:

MP5 Embassy Defence RIS. MFI Manufacture ( Fits Electric MC51 ONLY! This model is different from our MP5A5 & A4 version on the inside only. )
Price: $70.00 ***PMC Price*** Only: $50.00
SPECIAL NOTE: This item will NOT fit the REAL / LIVE WEAPON. We DO manufacture a version for the REAL WEAPON. CLICK HERE FOR REAL MP5 / HK51 RIS PRICING.
Standard Hand Guard for MC51. Marui Manufacture. Great as a spare for modifying / adding RAILS.
Price: $45.00 ***PMC Price*** Only: $30.00
Front Sling Ring & Nut Part# G-10 ( Metal )Part MP-42 (BLACK) Marui Manufacture... Fits only MP5A5 & MP5A4.
Price: $15.00 ***PMC Price*** Only: $10.00
Front Sling Ring (ONLY) Part# G-10 ( Metal ) (BLACK) Marui Manufacture... Fits only MP5A5 & MP5A4.
Price: $10.00 ***PMC Price*** Only: $5.00
Front Sling Nut (ONLY) Part# G-10 ( Metal ) (BLACK) Marui Manufacture... Fits only MP5A5 & MP5A4.
Price: $10.00 ***PMC Price*** Only: $5.00
Replacement Pins Hand guard MFI Manufacture.( Fits Electric G3A3, G3A4, SG-1 and MC51 models only.) (Plastic)
Price: $5.00 ***PMC Price*** Only: $2.00
MFI / HK MP5 / G3 REPLACEMENT HAND GUARD PIN: Made Specifically for LIVE WEAPONS. Manufactured from Weapons Grade Steel. Replaces the standard quick release style HK pin with one that has a screw at one end. Gives greater stability and will not come out by accident the way the standard quick release pins sometimes do; nor will they wear out like the standard ones do over time / use.
NOTE: This same item can be used as a replacement part on a number of different airsoft products as well. For example:
- M16A2 AEG Rear Receiver Cross Over Pin (above & behind select fire switch).
- M4A1 AEG Rear Receiver Cross Over Pin (above & behind select fire switch).
- M16A2 AEG Front Receiver Cross Over Pin (above & forward of mag well). *
- M4A1 AEG Front Receiver Cross Over Pin (above & forward of mag well). *
- MP5A5 AEG Front Hand Guard Cross Over Pin.
- MP5A4 AEG Front Hand Guard Cross Over Pin.
- G3 SG-1 AEG Front Hand Guard Cross Over Pin.
- G3A4 AEG Front Hand Guard Cross Over Pin.
- G3A3 AEG Front Hand Guard Cross Over Pin.
- MC51 AEG Front Hand Guard Cross Over Pin.
(*) = Some Minor Modification required. Modification can be done in minutes with standard flat hand file.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.

TOP

MISCELLANEOUS PARTS / GEARS / ETC:

MANUALS: Assorted Manufactures, Originals, Copies, Vintage & Current Issue. ( Call for availability 606-787-0022 M-F 10:30 AM to 6:30 PM EST ). You will need to know the exact make, model and manufacture of your weapon to be sure to get the correct manual.
Price: From $25.00 to $5.00 all depends on specific manual and if copy or original.

RED Plastic Barrel Cover (Specify Exact Model) Marui Manufacture
Price: $3.00 ***PMC Price*** Only: $1.00
Tokyo Marui Replacement Gear (1) (Specify which 1 of 3 gears you need.) for MP5s, M16s, AKs and G3s.
Click here for Current Pricing & Availability!
Batteries & US Rated Chargers: Click here

Click here for current prices for all accessories!

Click here for current prices for softair guns!

Click here to get an order form!

Just so there is absolutely � NO CONFUSION IN THE MARKET PLACE� we have added this paragraph to clarify a number of points.

MFI goes to great lengths and legal expense to research all INTELLECTUAL PROPERTY RIGHTS (IPR) of the real weapons manufactures to GUARANTY this we do not accidentally import / offer for sale any item this may be restricted by law or this violates IPR: Trademarks, Utility Patents, Design Patents, Copyright or Tradedress. Click here to better understand this issue and our method of removal. This applies to only valid / registered trademarks. We do not remove areas like �Law Enforcement Use Only� or other un-registered / not protected markings.

MFI does NOT offer about 40% of what is available / manufactured in the airsoft community due to IPR violations or Federal Law. Even though you may see other want-to-be / shady / foreign (with no telephone numbers or address) airsoft vendors selling such items does NOT make it legal. You can buy drugs on the street too but, it does not make them legal.

Trade names: These are for easy reference only and we do our best not to use the exact name or refer to it as similar, style or add disclaimer immediately following to assure this no one can possible mistake the items we sell for the real thing or this they have any relation to the real manufactures.

None of these air guns are produced, endorsed or in any way related to the real firearm manufacturers. Although they may look similar to more famous models made by real firearms manufactures their are NOT related to the real weapons manufactures.

All models shown are theatrical versions. All airsoft guns sold to non-DOC waiver holders are marked with "APPROVED" DOC orange markings. Buyers must be 21 years of age or older.

MFI has been importing airsoft & live weapons since 1985 which makes us the oldest airsoft importer in the USA by more than 15 years over any other vendor. As our primary business is in the real firearms industry we are not only knowledgeable about air guns but, also about the real thing as well. Our expertise speaks for itself on every web page. MFI products are legally obtained and sold in accordance with all US Laws and Regulations. We do sell to the general public but, reserve the right to refuse sale to anyone. (All NFA rules apply.)

Enforcement of Federal Regulations as of 10-01-98 has led to the seizure and destruction of non pre-approved / smuggled airsoft product of unlicensed importers. Be assured this all MFI advertised product has been pre-approved, legally cleared through US Customs and sellable in the USA. Our entire product line is IN STOCK here in the USA and available for immediate delivery.

As IPR issues and laws / regulations in regards to importation into the USA change everyday it is possible this we have missed a particular IPR. If you are the holder of an IPR this you feel maybe violated on our web site PLEASE contact us immediately. We will need to have the exact issued IPR reference number plus the date of issue and the type of IPR / category it falls under. If we see this there is any evidence of violation we will immediately remove the item in question from the web site, cease all sales of said item and open discussions as to the disposition of remaining product and possible royalties due the holder.

Air Soft BB Machineguns	Airsoft Accessories	Live Firearms Accessories
AEG Airsoft	Single Shot Soft Air	Send E-Mail To Us.
More About Air Soft	InterNet Special Offers!	Land For Sale
Foreign Orders	DISCOUNT / CLOSEOUT	MFI Home Page
Warranty	Safety First!	PLACE AN ORDER!
LIVE WEAPONS / PART SETS: HK SOCOM Mk.23 / HK USP Tactical / IMI Gaili ARM

Customer Service is available from 10:30 AM to 6:30 PM Monday through Friday. We are often in earlier and or later than the aforementioned hours so if we hear the phone ring we will answer it.

DAILY DEADLINE FOR ORDERS: Any order received by 1:00 PM East Coast Time (Monday through Friday... excluding closures of course) is GUARANTEED to be filled this same day. Orders received after this deadline will be filled on the next business day.

YOUR SATISFACTION IS ABSOLUTELY GUARANTEED!
For more information call: 606-787-0022 10:30 AM to 6:30 PM (East Coast Time)

Address: MFI 563 Via San Miguel Liberty, KY. 42539 U.S.A.

The materials contained on this web site have been prepared by MFI. All contents have COPYRIGHT PROTECTION and can not be duplicated in any form without the written permission of the author. All photographs, artwork and or design are also protected and are NOT in the public domain. Reproduction of any of these materials in any media is a violation of the intellectual property rights of the owner and subject to prosecution under Internet Law.

Copyright © 1989-2007 M. F. I.
ALL RIGHTS RESERVED.

Magazines	Stocks	Hand Guards
MC51 / G3A3-A4 / SG-1 Specific	Bipods	PSG-1 Specific
Tracer	Flashlights	Lasers
Ammo / BBs	Silencers	RIS / Rails
Scopes	Scope Mounts	Batteries
Red Dot Sites	Slings	Flashlight & Laser Mounts
Miscellaneous	Gears	General G3 Parts