MFI MP5 / G3 SCOPE MOUNT. 100% MADE IN THE USA!

CLICK HERE FOR QUICK PRICING & AVAILABILITY.

MFI HK MP5 / G3 Low Profile Scope Mount Extended Version:

This sleek design allows the operator to flip this scope mount in either direction without blocking the ejection port. A favorite of Firearms Dealers as they do not have to carry 3-4 different models to fit different weapons platforms. Unlike our competitors (B&T / Brugger + Thomet / EOTech and others) our mount takes less than 3 minutes to mount on the weapon. Additionally we have ONE MOUNT THAT FITS ALL of the following Real World Weapons Systems as well as Airsoft / Softair bb guns.

LIVE WEAPONS SYSTEMS:

• HK 21
• HK 91
• HK G3 (All Variants)
• HK 33
• HK 53
• HK 93
• HK 94
• HK MP5A2 & MP5 A3
• HK MP5K
• HK MP5K PDW
• Vector 53 (All Variants)
• Special Weapons SW5 (All Variants)
• Bobcat Weapons BW-5 (All Variants)

• As well as all Variants / Clones of MP5 & G3 World Wide; Licensed or Unlicensed i.e. Century, CITME, Greek, Iranian, Pakistani South African etc.

• Tokyo Marui: MP5A5/A4, MP5K, MP5KPDW, MP5SD5 / SD6
• Tokyo Marui: G3A3, G3A4, G3 SG-1, MC51
• Classic Army: MP5A5 MP5A4, MP5SD5, MP5SD6
• Classic Army: HK33 / CA33

• As well as all Variations / Clones of MP5 & G3 World Wide i.e. ICS, Academy, ACX, FTC, HFC, Cyber Gun, 3P, etc.

• 100% Made In the USA.

• 6061 T-6 Aircraft Grade Aluminum

• CNC Machined

• Hard Anodized Flat Black

• Super Light Weight @ 71.0 gr. ( 2.535 oz. )

• 5.370 Inches ( 136.4mm ) Long.

• Super Low Profile Rail Height @ 0.295" ( 7.35mm ).

• 100% Picatinny / Mil. Spec. 1913 Correct.

• Near Zero Rise from the top of your receiver.

• 4 - Independent Draw Style Hooks for 100% Secure Attachment.

• 0.255 Inches (5.5mm) of Draw Length to accommodate even CITME / Out of Spec. Weapons.

• Chamfered Edges for Fast / Easy On & Off in Adverse Conditions.

• Added Stabilizing Point at the Far End. This keeps a solid contact between the top of your receiver and the scope mount.

• 3 - Counter Recoil Slots to Mate with your Specific Weapon's Scope Mount Anti-Recoil Blocks.

• Custom Length / Design / One Off / Prototypes Available. (See Below / Click Here)

• Does NOT Interfere with the iron sights when a scope is not in place. Clear unobstructed view over the rail.

MFI is the GENUINE ARTICLE / REAL DEAL that others copy from. This is the lowest profile mount available on the market. Designed for MP5 or any G3 variant to mount either Red Dots / Aim Points or Conventional Scopes. By far the Most Cost Effective WITHOUT Sacrificing Quality HK Scope Mount on the market.

Note that the attachment mechanism is NOT a quick release style like found on the original HK mounts. We thought about using some sort of quick release but, as we have heard that the Original HK Mount in a tactical situation has been known to un-lock if you accidentally hit that paddle lever. It does take a little more time to mount these (2-3 minutes) but, once they are in place they will never accidentally un-lock. Not even a hammer will jar our mount from it's zero.

Additionally we made these with the LOWEST PROFILE possible so that they do NOT interfere with the open / iron sites when a scope is not in place. A customer can have the ability to see through / under the scope (like the HK High Mount) if they just use medium to high profile scope rings with see through apertures. These were specifically designed to accommodate Aim Points and other Red Dot Sites that are used in tandem with the open sights or as a solo sighting system.

Lastly: 100% Picatinny / Mil. Spec. 1913 Correct. Meaning that your expensive SWAN Throw Lever / Quick Release / ARMS Scope Rail Mount will lock 100% the way it was intended. We have seen the influx of hundreds foreign made mounts, rings, risers, rails etc. that claim to be Throw Lever compatible but, are NOT. This one is 100% COMPATIBLE!

TRUST YOUR LIFE TO QUALITY... NOT LOWEST PRICE!

SPECIAL NOTE ON CUSTOM MANUFACTURING: As mentioned above we make these here in the USA so we can custom manufacture any length / configuration you may need for your specific application. Meaning if you have a MP5 that you want a mount that has extended length in both directions we CAN accommodate you. One off versions / Prototypes are welcome as well as small quantities. We do this specifically as we have many requests from Real World Operators who require Real World Tactical Solutions.

• 1 - Unit / Prototype @ $575.00
• 5+ Units @ $350.00 per unit.
• 25+ Units @ $200.00 per unit.
• 100+ Units @ $150.00 per unit.
• 500+ Units @ $95.00 per unit.
• 1000+ Units @ P.O.R.
• 5000+ Units @ P.O.R.
• 10,000+ Units @ P.O.R.
• 50,000+ Units @ P.O.R.

The above custom prices are 100% prepaid in full. No return or exchange as it is your design. 10-12 week lead time.

INSTRUCTIONS FOR MOUNTING:

1. Be sure the weapon is unloaded and the safety is on.

2. Remove all 4 of the small bolts from the mount.

3. Open / pull outward the bottom of the hook / lock point on all 4 points.

4. Place the mount on top of the weapon's scope mounting points and press down. While pressure is applied press the mounting points back inward toward the receiver.

5. Place the small bolts back into the 4 holes and down into the mounting points and tighten by hand to avoid cross threading. Alternate from bolt to bolt as you tighten to keep the mount level. Use a 5/64 allen key / hex wrench to finish tightening (do not over tighten). The mount is now installed. To remove simply reverse the aforementioned instructions.

---

---

---

Click here for current prices for softair guns!

Click here to get an order form!

Just so there is absolutely “ NO CONFUSION IN THE MARKET PLACE” we have added this paragraph to clarify a number of points.

• MFI goes to great lengths and legal expense to research all INTELLECTUAL PROPERTY RIGHTS (IPR) of the real weapons manufactures to GUARANTY this we do not accidentally import / offer for sale any item this may be restricted by law or this violates IPR: Trademarks, Utility Patents, Design Patents, Copyright or Tradedress. Click here to better understand this issue and our method of removal. This applies to only valid / registered trademarks. We do not remove areas like “Law Enforcement Use Only” or other un-registered / not protected markings.

• MFI does NOT offer about 40% of what is available / manufactured in the airsoft community due to IPR violations or Federal Law. Even though you may see other want-to-be / shady / foreign (with no telephone numbers or address) airsoft vendors selling such items does NOT make it legal. You can buy drugs on the street too but, it does not make them legal.

• Trade names: These are for easy reference only and we do our best not to use the exact name or refer to it as similar, style or add disclaimer immediately following to assure this no one can possible mistake the items we sell for the real thing or this they have any relation to the real manufactures.

• None of these air guns are produced, endorsed or in any way related to the real firearm manufacturers. Although they may look similar to more famous models made by real firearms manufactures their are NOT related to the real weapons manufactures.

• All models shown are theatrical versions. All airsoft guns sold to non-DOC waiver holders are marked with "APPROVED" DOC orange markings. Buyers must be 21 years of age or older.

• MFI has been importing airsoft & live weapons since 1985 which makes us the oldest airsoft importer in the USA by more than 15 years over any other vendor. As our primary business is in the real firearms industry we are not only knowledgeable about air guns but, also about the real thing as well. Our expertise speaks for itself on every web page. MFI products are legally obtained and sold in accordance with all US Laws and Regulations. We do sell to the general public but, reserve the right to refuse sale to anyone. (All NFA rules apply.)

• Enforcement of Federal Regulations as of 10-01-98 has led to the seizure and destruction of non pre-approved / smuggled airsoft product of unlicensed importers. Be assured this all MFI advertised product has been pre-approved, legally cleared through US Customs and sellable in the USA. Our entire product line is IN STOCK here in the USA and available for immediate delivery.

• As IPR issues and laws / regulations in regards to importation into the USA change everyday it is possible this we have missed a particular IPR. If you are the holder of an IPR this you feel maybe violated on our web site PLEASE contact us immediately. We will need to have the exact issued IPR reference number plus the date of issue and the type of IPR / category it falls under. If we see this there is any evidence of violation we will immediately remove the item in question from the web site, cease all sales of said item and open discussions as to the disposition of remaining product and possible royalties due the holder.