MFI Weapons Accessories: PAGE

LIVE WEAPON'S ACCESSORIES:
Updated: 06-15-2008 @ ( 1143 hours )
NOTE: This is a real update not some counter. MFI is updated within 15 minutes of any change in inventory.

We provide links to product pages with DETAILED information and photos as well as links to current pricing and availability. Please use these links. New items will have limited information and photos supplied on this page until we make individual web pages for these new items.

As a Class III manufacture we are well aware of the requirements of the most demanding customer. Our customers include:

Civilian / Sportsman / Collectors
Private Military Contractors
Law Enforcement (PDs, SWAT, SRT, Sheriff Depts., DEA, BATF, FBI, DHS, USBP etc.)
PSD Teams (Private Security Detachments)
Our Nations Professional Soldiers.

MFI designs the most applicable & cost effective accessories available. Do NOT let our low prices fool you. We NEVER sacrifices CRAFTSMANSHIP or QUALITY for price.

BERETTA USA M4 Style Fake Silencer / Barrel Shroud for CX4 STROM: Fake / Non-Functioning.

CLICK HERE for Detailed Product Information & Photo.
MFI Spec. Ops Assault Weapons Padded Case: The ultimate in one size fits all weapons bags. Fits AR15 / M16, Heckler & Koch G3 / HK91 & HK 93, most Full Size Battle Rifles as well as Carbines / Submachine guns, etc. Includes: 3 - MOLLE Pouches!

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI Tactical MOLLE Vest / Body Armor Plate Carrier & Stand Alone Ceramic Ballistic Level III & IV Plate: 100% Mil. Spec. MOLLE Vest & Plate Carrier with high end features at low cost. We also carry Genuine Current Military Hard Body Armor Plates.

CLICK HERE for Detailed VEST Product Information & Photo.
CLICK HERE for VEST Current Price & Availability.

CLICK HERE for Detailed ARMOUR PLATE Product Information & Photo.
CLICK HERE for ARMOUR PLATE Current Price & Availability.
MFI QRS RED DOT & Covers: New Red Dot / Aim Point Style Sight.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI Heavy Duty Sniper Rings & Cantilever Mounts: New Aim Point Style Rings & Mounts.

CLICK HERE for Detailed Product Information & Photo.
MFI SOCOM Fake Silencer: Fake / Non-Functioning Knight's Armament Style SOCOM MK. 23 Silencer. Applications available for the following:
- HK USP Tactical
- HK SOCOM Mk. 23
- IMI UZI
- AR15 / M16
- AK-47
- HK G3 / HK91 / HK33 / HK93
- HK MP5 / SW5 / HK94 / Hesse MP5 / Bobcat
- HK USC & SW MP10
- Vector 33
- FN FAL / FN P90
- Walther P99
- Beretta M92
- Steyr AUG
- Glocks and many other handguns with threaded barrels!
CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI Riser Mount:

Made Specifically for LIVE WEAPONS. Manufactured from 6061 T-6 Aircraft Aluminum (main body / 1913 Picatinny rail) with Steel Over Sized Knobs and Steel Cross Over Shanks for Superior Strength. Mid-Range profile in height to accommodate owners of MP5s, G3s and ARs to just clear the front site for a 75% clearer view of the target. Low profile meaning 0.740 (18.8mm) rise from original mounting surface / rail / your flat top.
By far the best riser on the market. We are sure you have seen the crap that is out there for the same price as ours. FORGET rough casings, stupid drift pins used for anti-recoil stops and Non Mil. Spec. profile dimensions or even incorrect spacing in the cuts in the rail. The MFI Riser is 100% correct in shape and size so that you owners of the high end quick release throw levers from Swan or ARMS. YES finally a COST EFFECTIVE riser that is built to true Military Specifications i.e. 1913 Picatinny!
SPECIAL FEATURES:
- No bull#$@! Counter movement locking mechanism like the crappy drift pin facing downward under the mount to keep it from moving backwards on the rail under recoil. Ours has a genuine Mil. Spec. single cross over spline that gives you 100% lock down. We looked all over the market and 80% of the risers we saw had substandard stabilization devices used on them. Obviously not designed by someone knowledgeable in the firearms industry. Our MFI Riser has a single anti-recoil spline going across. The single spline is what most high end manufactures are using now as it allows greater mobility in adjustment especially if used in conjunction with non Mil. Spec. rails. Single Splines are obviously wider and have a much higher tensile strength than what is normally used on lesser quality mounts. CLICK HERE to see the underneath of our riser.
- Extra Wide Knobs (steel) with mil Spec. knurling for quick and secure grip even in the most extreme conditions with or without gloves. Inside knob has positive locking / anti-loosing material commonly known as self locking. Thus it will not come loose during tactical operations or extreme heavy use like during automatic weapons fire. Also slotted for a flat head screw driver for those of you who are totally paranoid about this issue.
- Cool looking! No bulky edges / Flat blunt cuts / Not just a box with slits.
- COST EFFECTIVE: Compare similar quality at 3 times the price!
SORRY OUT OF STOCK DUE TO MILITARY CONTRACTS. ETA 09-15-2008.
Retail @ $55.00
- 02+ Units @ $40.00 per unit.
- 05+ Units @ $35.00 per unit.
- 10+ Units @ P.O.R.
- 50+ Units @ P.O.R.
- 100+ Units @ P.O.R.
- 1000+ Units @ P.O.R.
- 5000+ Units @ P.O.R.
- 10,000+ Units @ P.O.R.
- 50,000+ Units @ P.O.R.
MP5 Embassy Defense RIS. MFI Manufacture ( Designed for LIVE WEAPONS ).
CLICK HERE for Detailed Product Information & Photo.
MFI / HK Low Profile Scope Mount (EXTENDED VERSION): Manufactured from 6061 T-6 Aircraft Aluminum. Lowest profile mount available on the market.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI / HK MP5 / G3 REPLACEMENT HAND GUARD PIN: Made Specifically for LIVE WEAPONS. Manufactured from Weapons Grade Steel. Replaces the standard quick release style HK pin with one that has a screw at one end. Gives greater stability and will not come out by accident the way the standard quick release pins sometimes do; nor will they wear out like the standard ones do over time / use. Product consists of long steel shank that is threaded on the inside of one end. Phillips style screw with broad dome head completes the opposite end to assure solid lock up.
Dimensions:
Total Length of Shank including head: 1.146" ( 29.1 mm)
Length of Shank NOT including head: 1.054" ( 26.7 mm)
O.D. of Shank: 0.235" ( 5.9 mm)
O.D. of Shank Head: 0.371" ( 9.4 mm)
Total Length of Threaded Screw including head: 0.401" ( 10.2 mm)
Length of Threaded Screw NOT including head: 0.296" ( 7.5 mm)
O.D. of Thread / Pattern: 4 mm X 1.0 pitch
O.D. of Threaded Head: 0.358" ( 9.1 mm)
Maximum Reach Between Heads: 1.247" ( 31.6 mm) [Obviously you can buy longer 4mm screws if needed at a hardware store.]
Minimum Reach Between Heads: 1.055" ( 26.8 mm)
NOTE: This same item can be used as a replacement part on a number of different airsoft products as well. For example:
- SITES Spectre HC Pistol Take Down Pin (Trigger Pack Grip Rear) Live Weapon.
- SITES Spectre HC Pistol Trigger Pack Retaining Pin (Front)Live Weapon.
- M16A2 AEG Rear Receiver Cross Over Pin (above & behind select fire switch).
- M4A1 AEG Rear Receiver Cross Over Pin (above & behind select fire switch).
- M16A2 AEG Front Receiver Cross Over Pin (above & forward of mag well). *
- M4A1 AEG Front Receiver Cross Over Pin (above & forward of mag well). *
- MP5A5 AEG Front Hand Guard Cross Over Pin.
- MP5A4 AEG Front Hand Guard Cross Over Pin.
- MP5K AEG Rear Plug Cross Over Pin.
- MP5K PDW AEG Rear Stock Cross Over Pin.
- G3 SG-1 AEG Front Hand Guard Cross Over Pin.
- G3A4 AEG Front Hand Guard Cross Over Pin.
- G3A3 AEG Front Hand Guard Cross Over Pin.
- MC51 AEG Front Hand Guard Cross Over Pin.
(*) = Some Minor Modification required. Modification can be done in minutes with standard flat hand file.

Retail @ $12.00
- 02+ Units @ $10.00 per unit.
- 10+ Units @ $8.00 per unit.
- 25+ Units @ $6.00 per unit.
- 100+ Units @ $5.00 per unit.
MFI M4 Fake Silencer: Fake / Non-Functioning Knight's Armament Style M4 Silencer.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI Special Operations Flashlight: An Economical Bright Tactical Weapons Flashlight.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI Forward RIS Grip: Knight's Armament Style Forward Pistol Grip.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
Tactical Quick Release Sling (3-Point Style): The ONLY Tactical Sling on the market with 3 Different Levels of TRUE QUICK RELEASE TENSION that is SELF-ACTUATING. Best Sling on the market for the money!

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
HK Style Sling Hook: Quick release HK style hook for slings.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI Barrel Accessory Mounts: Made of STEEL this simple design clamps to any barrel that has a diameter less than 0.955 (24.3mm). These will fit any AR15/ M16s, all G3s / HK 91 / HK 93, HK 94, all Galils, all AK47 /AK74, all UZIs, all FN FALs or FNCs, all Mini 14s, all AUGs, M1 Carbine, SIG 550, M14 / M1A1 & most Shotguns with aforementioned barrel diameter.
We manufacture 3 different models to choose from: Double Mounts & Single Mounts.

CLICK HERE for Detailed Product Information & Photo.
MFI 30 mm Scope Rings (PAIR) Millet Style: Low Profile Scope Rings for 30mm tubed scopes.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI 1 Inch Scope Rings: Low Profile Scope Rings for 1 inch tubed scopes.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI 4" Accessory RAIL / RIS: Universal Lower Rail or Scope Mount Rail 4 Inches Long.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI 6" Accessory RAIL / RIS: Universal Lower Rail or Scope Mount Rail 6 Inches Long.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
MFI 8" Accessory RAIL / RIS: Universal Lower Rail or Scope Mount Rail 8 Inches Long.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.
FN P90 Sling Hook Up Points: Barrel & Rear Butt Sling Hook Up Points.

CLICK HERE for Detailed Product Information & Photo.
CLICK HERE for Current Price & Availability.

Click here to get an order form!

MFI Home Page

Send E-Mail To Us.

PLACE AN ORDER!

Customer Service is available from 10:30 AM to 6:30 PM Monday through Friday. We are often in earlier and or later than the aforementioned hours so if we hear the phone ring we will answer it.

DAILY DEADLINE FOR ORDERS: Any order received by 1:00 PM East Coast Time (Monday through Friday... excluding closures of course) is GUARANTEED to be filled this same day. Orders received after this deadline will be filled on the next business day.

YOUR SATISFACTION IS ABSOLUTELY GUARANTEED!
For more information call: 606-787-0022 10:30 AM to 6:30 PM (East Coast Time)

Address: MFI 563 Via San Miguel Liberty, KY. 42539 U.S.A.

The materials contained on this web site have been prepared by MFI. All contents have COPYRIGHT PROTECTION and can not be duplicated in any form without the written permission of the author. All photographs, artwork and or design are also protected and are NOT in the public domain. Reproduction of any of these materials in any media is a violation of the intellectual property rights of the owner and subject to prosecution under Internet Law.

Copyright © 1989-2007 M. F. I.
ALL RIGHTS RESERVED.