Main M16 Accessories Page This Section Covers Airsoft Accessories For: M16A2, XM177E2, M4A1, M773 & All M16 AEGs.

All images are protected by Copyright© Law and are NOT in the public domain. LEGAL DISCLAIMER & WARNING

Magazines	Stocks	Hand Guards
Barrel Laser & Light Mounts	Bipods	Barrel Options (Cosmetic)
Tracer	Flashlights	Lasers
Ammo / BBs	Silencers	RIS / Rails
Scopes	Scope Mounts	Batteries
Red Dot Sites	Slings	Flashlight & Laser Mounts
Miscellaneous	Gears	General M16 Parts

All accessories listed in this section are manufactured by TOKYO MARUI unless stated otherwise. All parts listed in this section whether manufactured by MFI or by Marui will fit Marui M16s. All MFI manufactured products are specifically designed to near exact copies of their Marui counter parts but, at a fraction of the cost.

• Magazine Base Plate: MFI Manufacture. Completely BLANK (NO MARKINGS). For AEG High Capacity Magazines (Both 300 round & 190 round). Military Matt Black in Color.
  Retail Price: $7.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $1.75

  I have 875 of the above In Stock BUY ALL Units @ $0.50 per unit. ( LIQUIDATION / CLOSEOUT )

• Magazine Base / Floor Plate: Classic Army Manufacture. Marked as standard from factory. For AEG High Capacity Magazines (Both 300 round & 190 round). Flat Gray in Color.
  Retail Price: $7.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $1.00

  I have 100 of the above In Stock BUY ALL Units @ $0.25 per unit. ( LIQUIDATION / CLOSEOUT )

• Magazine Base / Floor Plate: MFI Manufacture. Completely BLANK (NO MARKINGS). For AEG Standard Capacity Magazines (Both 300 round & 190 round). Military Matt Black in Color.
  Retail Price: $7.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $1.75

  I have 850 of the above In Stock BUY ALL Units @ $0.50 per unit. ( LIQUIDATION / CLOSEOUT )

• Magazine Base Plate: Classic Army Manufacture. Marked as standard from factory. For AEG Standard Capacity Magazines (Both 300 round & 190 round). Flat Gray in Color.
  Retail Price: $7.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $1.00

  I have 100 of the above In Stock BUY ALL Units @ $0.25 per unit. ( LIQUIDATION / CLOSEOUT )

  ---

  
  

  

• Dual Magazine Connector (Marui Manufacture)(Metal) CLICK HERE FOR FULL DESCRIPTION.
  HK Style Mechanism. Note that this is a FULLY ADJUSTABLE and thus fits the following weapons systems:
  • M16 / AR15: AEG Airsoft & Live Weapons

  • G3 HK, CITME, etc: AEG Airsoft & Live Weapons

  • FAMAS F1 & G2: AEG Airsoft & Live Weapons

  • AK47 & AK74: AEG Airsoft & Live Weapons

  • Galil: AEG Airsoft & Live Weapons

  • L85A1 / SA80: AEG Airsoft & Live Weapons

  CLICK HERE FOR AVAILABILITY & CURRENT PRICES.

• Flash Suppressor for M16A2 / M4A1 style top slotted bird cage. (Black Metal) (Marui Manufacture)
  Retail Price: $35.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $7.00

  I have 25 of the above In Stock BUY ALL Units @ $3.50 per unit. ( LIQUIDATION / CLOSEOUT )

• Front Triangle Site, Hand Guard End Cap (Circular), Barrel & Flash Suppressor for XM177E2 Single Shot or Electric (MFI Manufacture) (All Orange Plastic but, you can paint black.)(NOTE DOC REG.) NOTE: Front site post is not adjustable. Does not include: Post Site or Sling Swivel. Additionally these are all permanently connected together / one piece but you can cut them to any length you like and add any after market flash suppressor you want.
  Retail Price: $15.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

  I have 250 of the above In Stock BUY ALL Units @ $0.50 per unit. ( LIQUIDATION / CLOSEOUT )

  
  

  

• Complete (see above) (READY TO MOUNT) XM177E2 Shorty Front Triangle Site, Hand Guard End Cap (Circular), Post Site, Sling Swivel, Short Barrel & Flash Suppressor (MFI BLACK PLASTIC) XM177E2 Single Shot or Electric (MFI Manufacture) (All Plastic and Painted Flat Black.)(NOTE DOC REG.) NOTE: Front site post is not adjustable. All of these are all permanently connected together / one piece.
  Retail Price: $35.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $6.00

  Click here for a photo of the above product!

  TOP

• Front Triangle Site, Hand Guard End Cap, Sling Swivel, Site Post & Barrel Parts: MA-20, MA-19 & A2-18 for M16A2 (Marui Manufacture) (Metal)
  Retail Price: $35.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $8.00

  I have 10 of the above In Stock BUY ALL Units @ $5.50 per unit. ( LIQUIDATION / CLOSEOUT )

• Front Triangle Site, Hand Guard End Cap, Site Post & Barrel Parts: M4-18 & MA-19 for M4A1 (Marui Manufacture) (Metal)
  Retail Price: $35.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $8.00

  I have 20 of the above In Stock BUY ALL Units @ $5.50 per unit. ( LIQUIDATION / CLOSEOUT )

  
  NOTE: The side sling swivel is not included in the above.

• Site Post & Spring: Part# MA-19 M4A1 or M16A2 (Marui Manufacture) (Metal)
  Price: 15.00 ***PMC Price*** Only: $10.00

• Sling Swivel & Drift pin (under the barrel). ( Metal ) Marui Manufacture
  Retail Price: $11.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

  I have 215 of the above In Stock BUY ALL Units @ $0.80 per unit. ( LIQUIDATION / CLOSEOUT )

• M4A1 & M16A2 Barrel Spacer and Compression Ring. ( Metal ) Marui Manufacture
  Retail Price: $7.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $2.00

  I have 20 of the above In Stock BUY ALL Units @ $1.00 per unit. ( LIQUIDATION / CLOSEOUT )

  
  

• Flash Suppressor M-16 / AR 15 Style (Plastic)
  
  Fits most single shot M16 variants out there. Has an internal hole diameter of 0.478 inches or (12.1 mm) with a single locating pin. This allows you latitude to bore out to a larger size for your custom needs. External diameter is 0.855 inches or (21.7 mm)
  Retail Price: $8.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $2.00

  I have 250 of the above In Stock BUY ALL Units @ $0.25 per unit. ( LIQUIDATION / CLOSEOUT )

  
  

• Flash Suppressor SG 550 & 551 Style (Plastic)
  
  Designed to fit nothing out there. Has an internal hole diameter of 0.371 inches or (9.4 mm). This allows you latitude to bore out to a larger size for your custom needs. External diameter is 0.870 inches or (22 mm)
  Retail Price: $8.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $2.00

  I have 750 of the above In Stock BUY ALL Units @ $0.20 per unit. ( LIQUIDATION / CLOSEOUT )

  
  

• Bayonet Standard Colt M7 Style. ( Plastic ) Black Grip with Chrome Blade. Great for SAFE knife fight training. Mounts & Locks Up (may be somewhat loose on flash suppressor) to TM M4A1, TM M16A2, Western Arm / MFI G3A3 & TM SIG 550. Could be made to fit TM XM177E2 (AEG & Single Shot)& TM M16A1 with minor modification to weapon bayonet lug point as these are somewhat too large. 10 minutes with a dremel tool or file.
  Retail Price: $8.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

  I have 20 of the above In Stock BUY ALL Units @ $1.25 per unit. ( LIQUIDATION / CLOSEOUT )

TOP

• M16 Short In Carry Handle Scope Mount (See Through) for M4A1, CAR, M16A2, XM177E2 MFI Manufactured & Designed for Real Weapons, but will also fit Airsoft BB Guns Made from Aircraft Grade Aluminum. (Picatinny / Weaver Compatible).
  SORRY THIS ITEMS IS CURRENTLY NOT AVAILABLE.
  
  

  

• MFI H-Bar Scope & Accessory Mount for M4A1, CAR, M16A2, XM177E2. MFI Manufactured & Designed for Real Weapons, but will also fit Airsoft BB Guns. Made from Aircraft Grade Aluminum.

  
  SORRY THIS ITEMS IS CURRENTLY NOT AVAILABLE.

TOP

• MFI / Barrel Accessory Mount: Made of STEEL this simple design clamps to any barrel.
  Designed for Real Weapons, but will also fit Airsoft BB Guns.
  Click here for detailed description & price.

  

• MFI / Duel Front Site Accessory Mount: Made of STEEL this simple design clamps to ONLY Tokyo Marui M16A2, M16 VIN, M733 & M4A1 models. Designed for Airsoft BB Guns ONLY. Allows you to mount a Laser & Flashlight at the same time or any 2 accessories simultaneously.
  Retail Price: $18.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

  I have 90 of the above In Stock BUY ALL Units @ $1.25 per unit. ( LIQUIDATION / CLOSEOUT )

  
  

  TOP
  

  

• MFI / Front Site Accessory Mount With Side Sling Swivel: Made of STEEL this simple design clamps to ONLY Tokyo Marui M16A2, M16 VIN, M733 & M4A1 models. Designed for Airsoft BB Guns ONLY. Allows you to mount a Laser or Flashlight while also giving you a Side Sling Swivel.
  Retail Price: $18.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

  I have 90 of the above In Stock BUY ALL Units @ $1.25 per unit. ( LIQUIDATION / CLOSEOUT )

TOP

TOP

M16 BIPODS:

• Harris Law Enforcement / Special Operations Sniper Fully Adjustable Bipod with Swivel Base. Requires below accessory to fit in the hole of the hand guard of M16A2 or M4A1. If mounting to a rail or RIS then you need to get the Knights Armament Bipod Adapter.
  CLICK HERE for information & pricing.

• Adapter for M16 Hand Guard A2 Style with Holes on Top and Bottom (MFI manufacture). Fits in through the holes from the inside of the hand guard. Allows Harris Bipod to be used.
  CLICK HERE for information & pricing.

TOP

• CLONE XM177E2 Hand Guards (upper & lower). ( Plastic Black ) MFI Manufacture.

  NOTE: These fit Tokyo Marui Electric XM177E2, Tokyo Marui Single Shot XM177E2, Academy Electric XM177E2, Academy Single Shot XM177E2 and Academy M655 CAR. They will NOT fit TM M4A1. We sell these as matching sets as they will not line up exactly with all the above model's upper or lower hand guards in configuration and coloration.
  Retail Price: $18.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

  I have 60 of the above In Stock BUY ALL Units @ $0.90 per unit. ( LIQUIDATION / CLOSEOUT )

TOP

• MFI / M4 / M16 AEG / HK MP5 / G3 REPLACEMENT HAND GUARD PIN: Made Specifically for LIVE WEAPONS. Manufactured from Weapons Grade Steel. Replaces the standard quick release style HK pin with one that has a screw at one end. Gives greater stability and will not come out by accident the way the standard quick release pins sometimes do; nor will they wear out like the standard ones do over time / use.

  NOTE: This same item can be used as a replacement part on a number of different airsoft products as well. For example:

  • M16A2 AEG Rear Receiver Cross Over Pin (above & behind select fire switch).
  • M4A1 AEG Rear Receiver Cross Over Pin (above & behind select fire switch).
  • M16A2 AEG Front Receiver Cross Over Pin (above & forward of mag well). *
  • M4A1 AEG Front Receiver Cross Over Pin (above & forward of mag well). *
  • MP5A5 AEG Front Hand Guard Cross Over Pin.
  • MP5A4 AEG Front Hand Guard Cross Over Pin.
  • G3 SG-1 AEG Front Hand Guard Cross Over Pin.
  • G3A4 AEG Front Hand Guard Cross Over Pin.
  • G3A3 AEG Front Hand Guard Cross Over Pin.
  • MC51 AEG Front Hand Guard Cross Over Pin.

  (*) = Some Minor Modification required. Modification can be done in minutes with standard flat hand file.

  
  CLICK HERE for Detailed Product Information & Photo.
  CLICK HERE for Current Price & Availability.

• M16A2 Solid Stock Wiring Harness (part# M-22) Marui Manufacture... ( Fits Electric M16A2, might also work with other TM M16 Variants.) New Unused Condition.
  Retail Price: $30.50 SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

• Motors: Stock / OME Marui Manufacture. We do NOT carry after market motors, only genuine Marui. ( Call for availability 606-787-0022 M-F 10:30 AM to 6:30 PM EST ). You will need to know the exact make, model and manufacture of your weapon to be sure to get the correct motor.
  Price: $50.00 (NOTE DOC REG.) SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $10.00

• MANUALS: Assorted Manufactures, Originals, Copies, Vintage & Current Issue. ( Call for availability 606-787-0022 M-F 10:30 AM to 6:30 PM EST ). You will need to know the exact make, model and manufacture of your weapon to be sure to get the correct manual.
  
  Price: $15.00 (NOTE DOC REG.) SUPER INVENTORY LIQUIDATION CLOSEOUT!! @ $3.00

• RED Plastic Barrel Cover (Specify Exact Model) Marui Manufacture
  Price: $3.00 ***PMC Price*** Only: $1.00

• Tokyo Marui Replacement Gear (1) (Specify which 1 of 3 gears you need.) for MP5s, M16s, AKs and G3s.
  Click here for Current Pricing & Availability!
  

• Batteries & US Rated Chargers: Click here

---

---

Click here for current prices for softair guns!

Click here to get an order form!

Just so there is absolutely “ NO CONFUSION IN THE MARKET PLACE” we have added this paragraph to clarify a number of points.

• MFI goes to great lengths and legal expense to research all INTELLECTUAL PROPERTY RIGHTS (IPR) of the real weapons manufactures to GUARANTY this we do not accidentally import / offer for sale any item this may be restricted by law or this violates IPR: Trademarks, Utility Patents, Design Patents, Copyright or Tradedress. Click here to better understand this issue and our method of removal. This applies to only valid / registered trademarks. We do not remove areas like “Law Enforcement Use Only” or other un-registered / not protected markings.

• MFI does NOT offer about 40% of what is available / manufactured in the airsoft community due to IPR violations or Federal Law. Even though you may see other want-to-be / shady / foreign (with no telephone numbers or address) airsoft vendors selling such items does NOT make it legal. You can buy drugs on the street too but, it does not make them legal.

• Trade names: These are for easy reference only and we do our best not to use the exact name or refer to it as similar, style or add disclaimer immediately following to assure this no one can possible mistake the items we sell for the real thing or this they have any relation to the real manufactures.

• None of these air guns are produced, endorsed or in any way related to the real firearm manufacturers. Although they may look similar to more famous models made by real firearms manufactures their are NOT related to the real weapons manufactures.

• All models shown are theatrical versions. All airsoft guns sold to non-DOC waiver holders are marked with "APPROVED" DOC orange markings. Buyers must be 21 years of age or older.

• MFI has been importing airsoft & live weapons since 1985 which makes us the oldest airsoft importer in the USA by more than 15 years over any other vendor. As our primary business is in the real firearms industry we are not only knowledgeable about air guns but, also about the real thing as well. Our expertise speaks for itself on every web page. MFI products are legally obtained and sold in accordance with all US Laws and Regulations. We do sell to the general public but, reserve the right to refuse sale to anyone. (All NFA rules apply.)

• Enforcement of Federal Regulations as of 10-01-98 has led to the seizure and destruction of non pre-approved / smuggled airsoft product of unlicensed importers. Be assured this all MFI advertised product has been pre-approved, legally cleared through US Customs and sellable in the USA. Our entire product line is IN STOCK here in the USA and available for immediate delivery.

• As IPR issues and laws / regulations in regards to importation into the USA change everyday it is possible this we have missed a particular IPR. If you are the holder of an IPR this you feel maybe violated on our web site PLEASE contact us immediately. We will need to have the exact issued IPR reference number plus the date of issue and the type of IPR / category it falls under. If we see this there is any evidence of violation we will immediately remove the item in question from the web site, cease all sales of said item and open discussions as to the disposition of remaining product and possible royalties due the holder.