MFI LIVE WEAPONS FORWARD WEAPONS RIS GRIP MAIN PAGECLASS II & III Machine guns / Weapons Accessories

MFI RIS / RAIL GRIP

All images are protected by Copyright© Law and are NOT in the public domain.
LEGAL DISCLAIMER & WARNING

CLICK HERE FOR QUICK PRICING & AVAILABILITY.

Product Description:

Updated: 12-23-2008 @ ( 1243 hours )
NOTE: This is a real update not some counter.
MFI is updated within 15 minutes of any change in inventory.

This item is NOT RESTRICTED FOR DOMESTIC US SALES in any way and we offer DOMESTIC USA shipping to ANYONE. Sorry we can NOT ship to ANY APO address regardless of actual location.

This item is 100% RESTRICTED FOR EXPORT OUTSIDE THE USA. The US Department of State regulates / restricts this product and it is NOT EXPORTABLE outside the USA even to LE, Governments or Military without State Department approval.

This approval IS AVAILABLE through MFI as we are an ITAR / Dept. of State Registrant with the Directorate of Defense and Trade Controls Office. We can obtain a US State Dept. Export License for you.

Please feel free to contact us if you have any questions on this issue. mfrost@mfiap.com

Our MFI Forward Grip is designed for a real weapons platform and thus will fit any 20mm RIS / RAS / Rail Interface System like: Knights Armament, Phobes & others. This is the exact same product we supply to SRT & SWAT Teams around the world. Ideal for an CQB scenario and a must for any RAIL / RIS System.

DO NOT LET OUR LOW PRICE FOOL YOU... And do not mistake MFI Grips for the CHEAPER airsoft / toy versions available from other vendors. What others offer are less costly as they are NOT designed for Live Weapons, Military or Law Enforcement Use. We could sell the less costly versions that are made of cheap plastic that is NOT impact resistant and do not fit well. In short if your intended use is a tactical application whether training or real life you need to have the very best battle proven product and that is the MFI Grip.

DESIGNED FOR THE REAL WEAPON &
WILL FIT ANY RAIL / RIS SYSTEM ( LE / MILITARY OR CIVILIAN )!

The difference is that the MFI Grip is CNC machined to a higher quality standard than other simple injected molded plastic grips. So you do not have the unsightly plastic seam found where the mold separates. We have improved the grip in a couple of areas as well.

Material used is High Pressure Ballistic Nylon. Unlike other grips on the market the MFI Grip is designed to take far more punishment both from IMPACT & from HEAT than the competition.
Inside we have made the threads that lock / adjust the grip to the RIS larger / more coarse to function flawlessly in extreme dirty / sandy / icy environments.
Inner Core / Threaded Area is 100% solid so as to survive even the most extreme riggers of combat. The use of injection molded plastic or hollow cores in considered substandard to MFI. This is why we insist on CNC machining from billet stock to avoid any unseen weak points from inclusions in the mold that leave air pockets.
The Leading Edge of the Upper Part of the Outer Body where the grip first meets the rail system is beveled at an angle to make attachment easier and faster.
Center Hole in the outer body is utilized for RIS that have counter sunk holes for additional lock up. The hole allows precise line up in the fastest mode possible.
O-Ring on the center shaft provides additional assurance that threads will not back out in a tactical scenario.
Knob on Center Shaft is dished and contoured to allow for fast, easy finger tightening.
Bottom of Center Shaft has a Slot that is machined in for tool or coin use to tighten or un-tighten the grip.
Finger Grooves / Channels cut in the handle assure excellent grip in extreme weather conditions with or without gloves. The grooves are machined at right angles to accommodate the use of O-Rings that drop directly into the channel which can provide superior grip when gloves are not used.

PRICING: MFI RIS GRIP:

The result is that the MFI GRIP has a Higher Impact Potential and Lower Price.
Price: $45.00

SPECIAL VOLUME DISCOUNTS:

02+ Units @ $40.00 per unit.

05+ Units @ $35.00 per unit.

10+ Units @ $28.00 per unit.

50+ Units @ POR

1000+ Units @ POR

10,000+ Units @ POR

100,000+ Units @ POR

CLICK HERE: To see a LARGER photo of the MFI Forward RIS Pistol Grip.

Place an Order E-Mail MFI

Warranty MFIAP Home Page

Customer Service is available via telephone 606-787-0022 from 10:30 AM to 6:30 PM Monday through Friday. We are often in earlier and or later than the aforementioned hours so if we hear the phone ring we will answer it.

DAILY DEADLINE FOR ORDERS: Any order received by 1:00 PM East Coast Time (Monday through Friday... excluding closures of course) is GUARANTEED to be filled this same day. Orders received after this deadline will be filled on the next business day.

YOUR SATISFACTION IS ABSOLUTELY GUARANTEED!
For more information call: 606-787-0022 10:30 AM to 6:30 PM (East Coast Time)

Address: MFI 563 Via San Miguel Liberty, KY. 42539 U.S.A.

The materials contained on this web site have been prepared by MFI. All contents have COPYRIGHT PROTECTION and can not be duplicated in any form without the written permission of the author. All photographs, artwork and or design are also protected and are NOT in the public domain. Reproduction of any of these materials in any media is a violation of the intellectual property rights of the owner and subject to prosecution under Internet Law.

Copyright © 1989-2008 M. F. I.
ALL RIGHTS RESERVED.

Place an Order	E-Mail MFI
Warranty	MFIAP Home Page