Will fit many weapons like:

• Glock Model 30 in 45 ACP (0.578 X 28)
• Ruger Mini 14 (9/16 X 24)
• HK MP5 / HK-94 (9/16 X 24)
• Glock Model 23 in .40 Caliber (9/16 X 24)
• US M1 & M2 Carbines (9/16 X 24)
• US FN FAL Inch Pattern (9/16 X 24)
• FN F2000 (9/16 X 24)

Knights Armament Style (Marked with US GOV.)

CLICK HERE FOR QUICK PRICING & AVAILABILITY.

Many of you have seen this style of silencer in Motion Pictures or on the TV News, as they are used by the US Armed Forces World Wide. As MFI is a Military Contractor we have the real thing here to take all the correct measurements off to assure as close a match as possible. The only areas where we deviate from the original is in length (obviously we need to cover as much of your barrel as possible) and the lettering is changed slightly so as not to violate Knights Armament Intellectual Property Rights.

SPECIAL NOTE ON STYLE & TRADE NAMES: "HK", "MP5", "G3", HK94, as well as other marks, are Registered Trademarks of Heckler & Koch and are used on this web site for reference only. This item is NOT manufactured by HK (Heckler & Koch). This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI.

Knight's Armament has Registered Trademarks & if any are used on this web site they are used for reference only. This item is NOT manufactured by Knight's Armament. This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI.

Israeli Military Industries has Registered Trademarks (UZI + others) & if any are used on this web site they are used for reference only. This item is NOT manufactured by IMI. This real weapon's manufacture has NO relationship to this product, nor any product offered by MFI.

Thus any mention of or use of trade names is done in reference to the real weapon for which these items are designed to fit on to. No MFI offered product has any Trademarks or other IPR use on it other than our own. We do this to be sure that there is NO CONFUSION IN THE MARKET.

What makes the MFI SOCOM Fake Silencers UNIQUE from all other real or fake silencers is:

• They are made specifically to take the punishment from LIVE FIRE! Unlike lesser quality mock silencers made for the HK USP Tactical, HK SOCOM Mk. 23, Beretta M9, Glocks, SIG P226 and many more the MFI version ALLOWS the weapon to CYCLE WITHOUT JAMMING WHEN FIRED SHOT AFTER SHOT! Please note that depending on the ammunition that you use the last shot lock back on the slide may or may not be effected.

  While we do NOT have unlimited funds and time to test every ammunition on the market we back up the above statement with a list of types of ammunition that we know for a fact work with this item. We additionally have a list of ammo that we know does NOT allow the weapon to cycle. Remember that even the real Knights Silencer does NOT allow the weapon to cycle unless you buy the special spring set from KA for that silencer. Also in real world applications many operators prefer the weapon NOT to cycle. This allows the silencer to be more efficient and thus quieter as there is no escaping gas from the slide blowing back. Additionally there is no ejected brass left at the seen to suggest that the action was a US Military Operation. We assume that there even more types of ammo that will not work with this item and we relay on our customers feed back to keep us informed.

  The following work 100% / allow the weapon to cycle WITHOUT JAMMING:

  • Speer Gold Dot 45 200 Gr. GDHP +P ACP
  • Remington Golden Saber Gov. Spec. 230 Gr.Brass Jacketed Hollow Point.
  • Remington UMC Gov. Spec. 230 Gr. ACP.
  • CorBen 45 ACP 210 Gr. Gov. Spec.

  Please note that the last 3 on the above list while these are not specifically listed as +P do appear to have a harder kick than standard / non +P ammo. Not being experts in this area we can only guess that the US Gov. Spec. must be a type of hard ball ammo or similar to +P in the powder charge. Thus likely any +P ammunition will work fine.

• The LETTERING / MARKINGS are INDEXABLE to the CORRECT POSITION! As you may not realize all threaded barrels and silencers have different starting and ending points on the threads. Thus you could have 5 identical weapons all made at the same time and the same silencer or flash suppressor will NOT end up at the same point on each weapon. This is why you get a peel washer with your AR15 flash suppressor (peels off 10 /1000th of an inch) so you can correctly index your suppressor to the individual weapon.

  So what we are saying is... No matter how many weapons you have... You will ALWAYS be able to get the lettering / U.S. GOV. markings in the exact location that you want them. This is because there is a set screw is hidden in the bottom of the end cap that allows the outer body to rotate 360 degrees around the inner barrel. First tighten the set screw and then thread the fake silencer on your weapon. Then loosen the set screw and continue the rotation as if to tighten / go on direction... Position the Laser Markings to the correct location & re-tighten the set screw. You can screw on & off the Fake Silencer and NEVER have to reset the letters / set screw. Obviously this set up is for an individual / specific weapon so if you move the fake silencer to a different weapon you will most likely have to re-index the outer body again.

This model is very similar to our HK USP Tactical Version & The HK SOCOM Mk. 23 except that it has a 9/16 X 24 RIGHT HAND thread. We also have the ability to thread these to 0.578 X 28 tpi for Glock Model 30s. In order to use this version you MUST HAVE A THREADED BARREL. This model does NOT slip over or hide any of the barrel like our SOCOM UNIVERSAL model does.

As mentioned previously the SOCOM FAKE SILENCER for BOTH the HK USP TACTICAL & the HK Mark 23 are a THREAD ON / EXTEND the barrel application ONLY.

As you can also see from the photos both models allow you to use the original sights as like the real Knights Armament silencer the outer diameter does NOT exceed or obstruct the sight picture at all. Other weapons in particular handguns will vary from model to model. There is no way that we can research all handguns so you can take the over all outer diameter listed in this page and divide that in half then take your specific handgun and find the center of the bore and see if the measurement exceeds the top of the sight or not. The reality is that most real effective silencers can not accommodate 90% of the handguns out there in this regards and most users do not care as they have alternative aiming mechanisms (lasers) or use the silencer at point blank range with the mass of the target being pressed up against the end of the silencer, which aids in sound reduction.

In short we have no real way of responding to questions on this topic (short of buying a sample of the 25,000+ handguns made since 1900). This is why we give you the measurements and why we have our RISK FREE 45 DAY RETURN POLICY. Yes you can even shoot through the item and if you are not 100% satisfied you can always return it for a refund.

What we CAN tell you (and this may seem elementary but, we get this question everyday) is that you MUST HAVE A THREADED BARREL in order for this item to attach to your weapon. MFI does NOT offer, sell or carry any threaded barrels for live weapons.

Materials of construction:

The Outer Body is entirely made out of Aircraft Grade Aluminum. To keep these as LIGHT WEIGHT as possible we use similar methods of construction as the real silencers. The Outer Tubes are made from stamped plate 6061 T-6 aircraft aluminum to allow the extreme radius on the end of the tube to be formed. The knurled part and some internal parts are CNC machined from billet 7170 T-6 aircraft aluminum to assure lightweight and durability.

In complying with BATF in regards to NO ACCESS to the inner cavity / air gap. The Knurled section is PERMANENTLY ATTACHED to the outer body.

The Inner Sleeve / Barrel Extension is made from Weapons Grade Steel to provide the longest life possible for live fire. Additionally the inner sleeve (which the bullet flies through un-obstructed) is sandwiched between the outer body exit hole and the knurled section. This allows the OUTER BODY to ROTATE 360 DEGREES around the inner barrel extension which, give you the ability to get the lettering in the correct position. Being sandwiched between two PERMANENTLY ATTACHED components keeps with the SPIRIT as well as the LETTER of the law. Any tampering with this item to separate the two parts will result in the tearing / destruction of the outer tube. We deliberately use very thing aluminum for the tubes so that they basically self destruct if tampered with.

Maximum Outer Diameter: = 35.0mm or 1.380 inches.

Maximum Inner Diameter: = 1/2 inch / 0.50 inches (12.6mm).

Maximum Length: = 177.1mm or 6 - 7/8 inches.

Weight: 4.8 ounces. Far lighter than any real silencer of the same size.

All outer bodies are marked as you see in these photos. As the markings are very small and thus very difficult to photograph (sorry our digital camera does not have a macro setting for extreme close ups) we have provided you with the exact words below. We have tried to adjust the font size so that it is in the correct /relative ratio as well.

SPECIAL NOTE ON MARKING POSITION: All SOCOM fake silencer markings REGARDLESS of model / version will end up reading left to right from the right hand side of the weapon. (So if you see any photos of SOCOM Fake Silencers with lettering that reads any other way just note that those are obsolete photos.)

The ENTIRE product is acid etched to simulate the special semi anti-glare effect found on the real thing. After the acid etching these are hardened anodized with the same semi flat deep black -blue color that is currently military spec. for the real silencers. All tubes for BOTH VERSIONS are labeled / marked the same (see above for exact markings) per mil. spec. requirements (same method as the originals are marked) via laser etching through the anodization. Just another reason why our silencers are far better than the el-cheepo airsoft versions that use decals or paint that wears off easily for lettering.

NOTE: These do NOT suppress sound in any way and are 100% legal for the regular civilian to own in all 50 US States.

NOTE ON VOLUME PRICING / MIX & MATCH: We ALLOW anyone (dealers & regular customers) to mix and match types, versions and styles of fake silencer to achieve a higher volume level which will give you a lower per unit price. In short if you want to buy 1 of the M4 Fake Silencers & 1 of the SOCOM models at the same time you get the LOWER 2 UNIT PRICE for each respective product. Same goes for higher numbers you can choose 2 - M4 Style (one for AR15 & one for FN FAL), 1 - SOCOM UZI Model, 1- SOCOM USP Tactical Model and 1 - SOCOM MK23 Model to get the LOWER 5 UNIT PRICE!

ADDITIONALLY: As many of our first time customers are skeptical on the quality of fake silencers (being burned by other lesser quality or unscrupulous re sellers)... And as we are so confident that you will be super impressed with the HIGH LEVEL of CRAFTSMANSHIP / SUPERIOR QUALITY of our FAKE SILENCERS we allow a 30 day re-order period to allow your first purchase QUANTITY(S) to be added to your second purchase! This means that if you buy ONLY ONE of our fake silencers to see what the quality is like... and then re-order (within 30 days) a second fake silencer you get the second unit at the LOWER 2 UNIT PRICE! This also applies on consecutive / subsequent orders to make up even larger volumes! That means that if you re-order a third time within 30 days of the second silencer and order 3 more units (of any type) you get the 5+ unit discount on those 3 units. Yes this goes on endlessly and is accumulative as long as you re-order within the 30 day limit. This is NOT retroactive on previous prices meaning we do NOT give you credit or money back on any previously ordered item. Discounts apply only to subsequent purchases. NO OTHER RE SELLER OFFERS THIS TYPE OF MIX & MATCH DISCOUNT!